Making CBD oil from flower is straightforward but there are a few important factors that you need to consider so you don't ruin the oil. CBD oil doesn’t have to cost an arm and a leg. In fact, you can significantly reduce the costs by making it at home. Here we present the most common at-home extractions for CBD oils — and why you should try them out.
How to Make CBD Oil from Flower
CBD oils and tinctures are a great way of consuming CBD. It’s a practical, quick and effective way of getting the benefits of CBD without the need for breaking down and rolling CBD buds.
In this article we look at how to make your own CBD oil from hemp flower at home. It’s really not as difficult as it sounds but it takes a few tricks to learn how to do it right.
- What is CBD oil?
- Is making your own CBD oil a smart choice?
- The DIY route: How to make CBD oil
- Storing and using CBD oil
The Health Benefits of CBD Oil
Hemp-derived CBD oil is rich in cannabidiol, a naturally occurring compound that interacts with the body’s endocannabinoid system. CBD oil has seen a rise in popularity in recent years — to the point where people are beginning to produce their own.
Unlike cannabis products derived from marijuana plants, hemp-sourced CBD products contain less than 0.3% THC and allow users to consume cannabidiol with none of the intoxicating effects of cannabis. The 2018 Farm Bill makes hemp federally legal in most states and therefore widely available to consumers.
CBD oil, which is made from the leaves, flowers, and stalks of hemp plants, differs from both hemp seed oil, which comes from cannabis sativa seeds, and from cannabis oil that contains considerable amounts of THC. Hemp CBD oil has potent levels of CBD but won’t give users the “high” normally associated with cannabis.
CBD oil is a popular way to enjoy CBD thanks to its convenience, simplicity of use, and effectiveness. CBD tinctures offer high bioavailability and are easy to add to foods and drinks and unlike CBD flower, you don’t need to look for a private smoking place.
And the best part is that you can easily make CBD oil at home using regular supplies that you might already have lying around in your kitchen.
Take a look at our CBD infographic to learn how most people enjoy their CBD.
DIY CBD Oil: Learn How to Make CBD Oil from Hemp Flower in Your Kitchen
Commercial-grade CBD oil is made in large batches using advanced machinery. However, there are simple, home-applicable methods of making CBD from hemp flower.
Why should you even bother making CBD oil at home?
As any hemp consumer knows, each hemp flower strain offers a broad spectrum of cannabinoid compounds, terpenes, flavonoids, and other substances that affect the aroma, taste, and benefits of the product.
Commercial CBD oil from your particular favorite strain of hemp flower might not be available on the market. Making CBD oil in your kitchen allows you to concentrate the effects of your favorite strain in a compact tincture bottle, creating your own customized CBD-rich supplement (or CBG for that matter).
Making CBD oil at home always requires a step that involves cooking. Commercial methods of CBD oil and tincture production entail a direct extraction process of oil from hemp plant material. Extraction is not something you should attempt at home, as it requires high-grade equipment and can be dangerous.
Making CBN oil is a far more complex process. Read more about what CBN oil is here.
If you want to try a professionally made full spectrum CBD oil you can try this 3000mg tincture.
How to Make CBD Oil At Home?
People use CBD oil to boost wellness, deal better with stress, and ease different types of physical discomfort (1). With so many positive effects on the body, as well as the costs involved in professional production, commercially available products can be expensive. This, of course, applies to high-quality CBD oil.
Many new users are wondering if it’s possible to make CBD oil at home, and whether or not it’s a good option to save money on your supplementation. While DIY CBD oils won’t be crafted with the same precision as professionally manufactured extracts, a homemade batch of CBD drops is still safer than a commercial product without a Certificate of Analysis (2).
If you’re considering the idea of making CBD oil at home, we’ll be glad to help. After spending several years in the superfoods and hemp industries, we have gathered our experience and packed it into a concise guide to at-home extractions.
Don’t worry, this isn’t rocket science. In fact, all you need to make CBD oil at home is a high-CBD hemp flower, a solvent, and/or food-grade carrier oil.
Let’s get down to work.
Why You Should Learn How to Make CBD at Home?
Because it’s easy and doesn’t require anything beyond some basic kitchen equipment. The reason why not many people decide to perform their own extractions is the overwhelming abundance of commercially available products; you know how it is, convenience is the name of the game these days.
CBD oil is available both online and in local specialty stores. In fact, CBD has become so popular that you can find it in vape shops, organic food stores, and wellness centers. Local retailers offer limited options, so we always recommend finding a trustworthy online supplier. Online stores offer a broader selection of products, from capsules to vapes and edibles such as CBD gummies and honey sticks.
So, why would you want to make CBD at home with so many products at hand?
Making CBD oil at home is a great way to save money that you’d otherwise spend on browsing hundreds of different brands, comparing the ingredients in their products, the prices, and user reviews.
Once you’ve got the know-how, life becomes easier.
Not only that but making CBD oil at home gives you full control over the quality of the final product. If you can gather high-quality hemp flower and a decent carrier oil, you’re halfway home.
Last but not least, homemade CBD oil is more cost-efficient. Although soaking the plant matter in the solvent requires some time before your infusion gains enough potency, you don’t have to invest in advanced technology and specialized lab workers to get a high-quality full-spectrum extract.
What You Need to Make CBD Oil?
Everything starts from the plant. First, you’ll need to find some high-quality CBD flower — derived from hemp if you want to stay compliant with federal law. There are plenty of great companies that grow craft CBD strains and ship their products to all 50 states.
If you live in a state that has legalized marijuana, you can use a high-CBD hybrid strain obtained through selective breeding. These are available in cannabis dispensaries and are also known for a higher terpene content than their hemp-derived counterparts.
The majority of hemp CBD strains are grown indoors or in greenhouses rather than outdoors, so the bag appeal and the overall quality of the buds is better.
Another important ingredient is the carrier oil. These range from hemp seed oil to olive oil to canola and MCT oil. MCT is considered the best source of fats for CBD, as the cannabinoid shows higher absorption rates in the presence of saturated fatty acids.
Besides, you’ll need some basic kitchen equipment, such as a pot, spatula, fine mesh strainer, glass containers, jar, oven, and a heatproof bowl or pie plate.
How to Prepare CBD (Activating the CBD)?
There is little CBD in fresh hemp plants. Instead, hemp contains high concentrations of CBDA, the inactive precursor of CBD. CBDA offers many health benefits, but it doesn’t have the properties of CBD. In order to transform CBDA into CBD, you need to remove an extra carboxyl group from the compound. In plain English, decarboxylation means adding extra heat to activate CBD and get the most out of its content (3).
If you’re looking for a professional way to decarboxylate your plant material, there are special machines known as decarboxylators available in specialty stores. This equipment ensures that the process is conducted efficiently both on its short and long tail, which have different times and temperatures depending on the desired cannabinoid.
Nevertheless, you may just as well use less expensive methods and still perform efficient decarboxylation. Simply use your oven or a slow cooker. They sacrifice some precision, but then again, not everyone can afford a professional decarboxylator.
Decarboxylating CBD in the Oven
What you’ll need:
- High-quality CBD hemp flower
- Baking tray
- Parchment paper
- Grind your CBD buds using the herb grinder. Break them down into smaller pieces instead of grinding them into a fine powder.
- Lay a baking tray with a sheet of parchment paper. Spread the ground hemp evenly, and preheat the oven to 240 degrees Fahrenheit (115 Celsius).
- Bake the CBD flowers in the oven for about 45 minutes, up to one hour depending on how dry the buds are. Buds with more moisture may require more time in the oven.
- Remove the CBD from the oven and transfer it to a glass container. It should have a bit of a brownish color.
How to Make CBD Oil?
If you’ve gathered the necessary supplies and are ready to make CBD oil at home for the first time, you can use two solvents for the job: food-safe alcohol or cooking oil.
Alcohol extraction involves soaking the hemp plant in alcohol until it pulls all the beneficial compounds from it. The infusion gains potency over time; the longer you soak the hemp in alcohol, the stronger your product will get; this is how you make cannabis tinctures. However, since alcohol is highly flammable, you shouldn’t perform it in enclosed places with access to open fire. Gas stovetops are a big no-no for alcohol extractions; electric ones are much safer.
If you’re looking for a more beginner-friendly method, cooking oil extraction will come in handy. This method involves using plant-derived oils as carriers due to CBD’s fat solubility. It’s a slow process for which you can use different types of cooking oils.
These are at-home extraction methods. Professional manufacturers use pressurized CO2 in order to maximize the quality and quantity of their yields. The CO2 extraction technology doesn’t require additional heat or solvents, which makes it both effective and safe. Unfortunately, it also requires a lot of financial resources to purchase and maintain the machinery, not to mention the highly qualified lab workers.
Below we cover all types of homemade extractions in detail.
Make CBD Oil with Alcohol
What you’ll need:
- 14 grams of ground, decarboxylated hemp flower
- 500 ml of high-proof food-safe alcohol (Everclear, vodka, or spirit)
- Mixing bowl
- Double boiler
- Glass jar
- Tincture bottle
- A plastic syringe or glass dropper
- Place the decarboxylated CBD in the mixing bowl and cover it completely with alcohol. Stir the decarbed buds for up to 10 minutes using the wooden spoon. During this time, the alcohol should already extract some of the compounds such as cannabinoids and terpenes. Once done, you can pour the liquid into a glass jar. Store it in a cool and dark place for a minimum of 2 weeks up to several months. As mentioned, the longer it sits, the stronger it gets.
- Separate the CBD-infused alcohol from the plant material. Strain the liquid through a piece of cheesecloth into a collecting container. At this point, the tincture should have a dark green color.
- Set up a double boiler. Pour the alcohol solution to the top of the dish and apply low heat. High-proof volatile will easily evaporate at low temperatures because it’s highly volatile. You can turn the heat on and off if necessary, just make sure you have a good ventilation system, and if not, run the extraction outdoors. The vapor from alcohol is flammable and thus may cause an explosion.
- Once you’ve evaporated all the alcohol, the extract will have a tar-like texture. You can draw it up into a syringe or mix it into a carrier oil to increase the volume of your final product.
Make CBD Oil with MCT Oil
If you want to make CBD oil with MCT oil, follow the steps from the alcohol extraction, and once you have a thick extract, suspend it into MCT oil in the desired ratio. MCT oil is derived from coconut and comes with medium-chain triglycerides, which are known to boost the bioavailability of CBD and other cannabinoids. You can find it in health supplement stores.
Make CBD Oil with Coconut Oil
This method is similar to how you make cannabis-infused coconut oil or the famous cannabutter. But this time, we’re working with hemp-derived CBD, not medical-grade cannabis.
What you’ll need:
- ½ oz of high-CBD hemp flower
- 500 ml of melted coconut oil
- Double boiler
- Glass jar with a lid
- Glass collecting dish
- Combine the decarboxylated CBD buds with the coconut oil to start the extraction process. Place them in the double boiler, filling the bottom part of the dish with some water, and bring it to a delicate simmer. Do not bring the mixture to a rolling boil because anything over 150 degrees Celcius will destroy most terpenes. The simmering process takes around 3 hours; the end product will look slightly darker than the raw oil.
- Remove the top of the boiler, take out your jar, place the cheesecloth over the top of the collecting dish, and pour the mixture into it. You can use a spatula to push the plant material against the strainer so that it squeezes the most out of it.
- Transfer the CBD coconut oil to a jar, seal it tightly, and store it in a cool, dry place. You can use it alone or use it as an infusion in your CBD recipes.
Make CBD Oil with Olive Oil
This method follows the same process as making CBD oil at home with coconut oil. If you don’t have any coconut oil at hand, olive oil will make for a great substitute, especially if you’re up for some CBD-infused pesto, guacamole, or drizzling it over a slice of pizza.
How to Get the Most Out of Your Homemade Extractions?
- Choose high-quality organically grown CBD flower
- Use healthy carrier fats (coconut oil is the best due to high amounts of saturated fat)
- Carefully calculate the dosage in your CBD infusion
- Add natural flavorings to the homemade CBD oil to mask the hempy flavor
- Store your CBD oil as you would store any other herb-infused oils
Tips for Using Homemade CBD Oil
- Use CBD oil sublingually (under the tongue) to avoid the first-pass metabolism in the liver and increase its absorption rate.
- Add CBD oil to your meals or cook with it. However, make sure not to exceed 160 degrees C so that you don’t waste any CBD.
- Make CBD vape oil at home by using a thinning agent in your CBD oil solution (e.g. vegetable glycerin or propylene glycol).
- When working with alcohol, let the mixture sit for a few months to maximize its potency.
- You don’t have to evaporate all the alcohol from your tincture. You can reduce it by half and add it to drinks and cocktails.
- Add CBD to a fat base and other natural skincare ingredients of your choice to create homemade CBD cream.
Advantages of Professional CBD Oil Extraction
Wondering how CBD oil made at home compares to a product obtained through CO2 extraction?
As we said, CO2 extraction is the golden standard for manufacturers. This method produces safe, premium-quality products, but it requires a piece of expensive triple-chamber equipment, large quantities of hemp biomass, and experienced professionals to oversee the extraction. Using CO2 as a solvent ensures a pure and more potent product than any homemade method. If you’re looking for a top-shelf product, CO2-extracted CBD is still second to none.
Making CBD Oil at Home: Is It Worth A Try?
Of course, especially if you want to kickstart your CBD routine on a low budget. In the meantime, you can browse through different brands online and choose the one that fits the generally accepted quality standards. Many premium companies have reward programs to make their products more affordable for everyone. As you do your research, a bottle of homemade CBD oil will wait for you in your health cabinet.
Still, we recommend buying a professionally extracted CBD oil if you want to maximize the results of your supplementation. Making CBD oil at home is fun and very rewarding, but it still doesn’t give you such a complete cannabinoid profile as CO2 extraction.